Fast Mecha White TDS - ABS-like scratch-resistant resin
1. Product Introduction
Fast Mecha White offers rapid printing and curing, striking a perfect stiffness and toughness balance.Β
It provides a non-scratch, slick matte surface with low friction that prevents wear in moving joints. This excellent resin features a superb solid white color, outstanding resolution, low odor, and super simple cleaning.
Application:
- Joints doll
- Gears (mixed with Tenacious at 20%)
- Model MakingΒ
FindΒ ABS-like scratch-resistant resin -Β Fast Mecha White here
2. Property Data
|
Mechanical Properties |
Measure |
Method |
|
Tensile Stress at Yield |
32 |
ASTM D638 |
|
Tensile Stress at Break |
30 |
ASTM D638 |
|
Youngβs Modulus |
1050 |
ASTM D638 |
|
Elongation at Break |
23 |
ASTM D638 |
|
Flexural Modulus |
1300 |
ASTM D790 |
|
Other Properties |
Measure |
Method |
|
HDT at 0.455 MPa |
70 |
ASTM D648 |
|
IZOD Impact (Notched) J |
29 |
ASTM D256 |
|
Shore Hardness |
70 |
ASTM D2240 |
|
Solid Density |
1.25 |
ASTM 792 |
|
Water Absorption (24hr) |
0.75% |
ASTM D570 |
|
Liquid Properties |
Measure |
Method |
|
Viscosity at 25Β°C (77Β°F) |
140 |
ASTM D7867 |
|
Liquid Density |
1.15 |
ASTM D1475 |
3. Work Flow
Printing
|
Material Name |
Fast ABS-Like Resin (Mecha White) |
|
Primary Printer Compatibility |
MSLA / LCD/ DLP 3D Printers |
|
Secondary Printer Compatibility |
385nm - 405nm 3D Printers |
|
Hardware Requirement |
Access to exposure control is required |
|
Supported Slicer Software |
Chitubox, Lychee Slicer, Anycubic Photon Workshop, Blueprint Studio, Elegoo Satellite |
|
Slicer Profiles Download |
|
|
Temperature required |
25β or above |
Β
Clean
|
Cleaning Step / Category |
Instructions & Recommendations |
|
Cleaning Solvents |
β’Β Preferred: 95% concentrated Ethanol or IPA. β’ Alternative: Methanol (must not contain acetone). |
|
Cleaning Time |
Submerge parts in the solvents for 4-5 minutes, using the ultrasonic cleaner. |
|
Submersion Limit |
DoΒ notΒ submerge parts in alcohol for more thanΒ 5 minutes. |
|
Extra Step |
For complex models, use a painter brush (or any brush made with hair) to gently remove excess resin from the printed part. |
Β
Drying
|
Drying |
Remove alcohol by using an oven for 7-8 minutes (using a hair dryer requires 10 minutes) |
|
Note: For complex parts with cavities, repeat the clean/dry cycle multiple times. |
|
|
Quality Check |
Touch the dried surface. If it is still sticky, wash and dry the part again until smooth. |
Β
Post Curing
|
Step / Factor |
Instructions & Recommendations |
|
Pre-curing Checklist |
Ensure the part is completely clean of excess resin andΒ fully dryΒ (no alcohol left) before starting. |
|
UV Specifications |
Use a UV light source with a wavelength ofΒ 395-405nm. |
|
Curing Time |
Cure for approximatelyΒ 15 minutesΒ to achieve optimal strength. |
|
Efficiency Tip |
Submerge the printed object in water during the UV curing process to significantly increase curing efficiency. |
Β
More informationοΌ
Check outΒ Fast Mecha White User manual
DownloadΒ Fast Mecha White TDS PDF version
Β