Blu Nylon - Blu Nylon Black TDS

This TDS is forΒ Blu Nylon Black only.

Download TDS in PDF

website globe icon

View User Manual

blutough-nylonblack__PID:3a36640e-372b-4ec5-8932-bdb9da68b499

Check out Blu Nylon Black

Β 

1. Product Introduction

Blu Nylon Black: Extreme Toughness, Precision Details.

Stop choosing between high resolution and real-world durability. Blu Nylon Black is an 8K-capable engineering resin that delivers extremely high toughnessβ€”even surpassing standard Bluβ€”allowing printed parts to easily withstand drops and heavy impacts.

Application:

  • Engineering Prototypes
  • Mechanical Aids
  • Fixtures and Jigs
  • Medical Devices
  • Load-bearing parts

2. Property Data

Mechanical Properties

Measure

Method

Tensile Stress at Yield

47

ASTM D638

Tensile Stress at Break

45

ASTM D638

Young’s Modulus

1750

ASTM D638

Elongation at Break

50

ASTM D638

Flexural Modulus

1900

ASTM D790

Β 

Other Properties

Measure

Method

HDT at 0.455 MPa

63

ASTM D648

IZOD Impact (Notched) J/m

53

ASTM D256

Shore Hardness (D)

78

ASTM D2240

Solid Density

1.15

ASTM 792

Water Absorption (24hr)

0.75%

ASTM D570

Biocompatibility

√


Liquid Properties

Measure

Method

Viscosity at 25Β°C (77Β°F)

750

ASTM D7867

Liquid Density

1.1

ASTM D1475


3. Work Flow

  • Printing withΒ Blu Nylon Black

Material Name

Blu Tough Resin (Nylon Black)

Primary Printer Compatibility

MSLA / LCD/ DLP 3D Printers

Secondary Printer Compatibility

385nm - 405nm 3D Printers

Hardware Requirement

Access to exposure control is required

Supported Slicer Software

Chitubox, Lychee Slicer, Anycubic Photon Workshop, Blueprint Studio, Elegoo Satellite

Slicer Profiles Download

    Β 

    • Cleaning

    Cleaning Step / Category

    Instructions & Recommendations

    Cleaning Solvents

    β€’Β Preferred: 95% concentrated Ethanol or IPA.

    β€’ Alternative: Methanol (must not contain acetone).

    Cleaning Time

    Submerge parts in the solvents for 3-4 minutes, using the ultrasonic cleaner.

    Submersion Limit

    DoΒ notΒ submerge parts in alcohol for more thanΒ 5 minutes.

    Extra Step

    For complex models, use a painter brush (or any brush made with hair) to gently remove excess resin from the printed part.

    Β 

    • Drying

    Drying

    Remove alcohol by using an oven for 7-8 minutes (using a hair dryer requires 10 minutes)

    Note: For complex parts with cavities, repeat the clean/dry cycle multiple times.

    Quality Check

    Touch the dried surface. If it is still sticky, wash and dry the part again until smooth.

    Β 

    • Post Curing

    Step / Factor

    Instructions & Recommendations

    Pre-curing Checklist

    Ensure the part is completely clean of excess resin andΒ fully dryΒ (no alcohol left) before starting.

    UV Specifications

    Use a UV light source with a wavelength ofΒ 395-405nm.

    Curing Time

    Cure for approximatelyΒ 15 minutesΒ to achieve optimal strength.

    Efficiency Tip

    Submerge the printed object in water during the UV curing process to significantly increase curing efficiency.

    Β 

    4. Biocompatibility Certification

    For biocompatibility-related applications, please follow the post-processing guideline here.